 |
|
| |
| |
|
 Can we transform our existing RJ45 cordset ?
Do we need any specific tool, or special cabling skills ?
Can we have mechanical codings ?
I have made a mistake (example : bad coding position), Can I “dismount” the insert ?
Can I use my RJ Field plug on an other cable ?
Do I have to order separatly panel gasket for square flange receptacle ?
How RJ Field does to improve EMI Shielding ?
How can we protect the rear of the receptacle ?
Is RJ Field completely sealed ? What is the meaning of IP67 ?
Do you have a sealed receptacle version ( when disconnected or without cap ) ?
For very harsh vibration environment, how can we connect the RJF receptacle backtermination to our pcb without using a “fragile” RJ45 connection ?
Which cable diam can be used with your plastic or metallic gland?
UTP
STP
SFTP
LSZH, LS0H
HFFR
Cat 5
Cat 5e
Can we transform our existing RJ45 cordset ?
YES RJ field concept allows to transform any RJ 45 cordset (already assembled) |
| Close |
Do we need any specific tool, or special cabling skills ?
NO special tool & no special cabling skill requested to transform your RJ 45 cordset. |
| Close |
Can we have mechanical codings ?
YES : 4 positions coding available in Series RJF & RJF TV |
| Close |
I have made a mistake (example : bad coding position), Can I “dismount” the insert ?
Yes : Use insert removal tools : RJF ODE for RJF and RJF TV series. Only one tool for plug & receptacle.  |
| RJF ODE |
|
| Close |
Can I use my RJ Field plug on an other cable ?
Yes : Use insert removal tools : RJF ODE for RJF and RJF TV series and 544 OT 02 for RJF 544 serie. These tools are available for plug & receptacle. |
| Close |
Do I have to order separatly panel gasket for square flange receptacle ?
YES - panel gasket have to be ordered separatly
 RJF TV serie : P/N = JE 19
RJF serie : P/N = JE 18
RJF 544 serie : P/N = 544 02 JE) |
| Close |
How RJ Field does to improve EMI Shielding ?
On conductive shells versions (“N” and “G” platings for RJF & RJF TV series, and “M” version for RJF 544 serie), the shielding is directly transmitted from shielded RJ 45 plug to the receptacle panel through metallized inserts. |
| Close |
How can we protect the rear of the receptacle ?
Use 2PE & 7PE Shells version (backshell + plastic gland)
Use 2PEM & 7PEM Shells version (backshell + metallic gland)
|
| Close |
Is RJ Field completely sealed ? What is the meaning of IP67 ?
RJ Field Series are IP67 rated : it means that when a plug is connected on a receptacle or with a cap, they are protected against water (under 1 meter during one hour, without any effect on the connector properties) & dust.
|
| Close |
Do you have a sealed receptacle version ( when disconnected or without cap ) ?
YES, you could use our sealed version 2SA or 7SA, which provide a waterthighness throught the receptacle. This version goal is to protect electronic equipments at the back of the receptacle when there is no cap or when the receptacle is diconnected from the plug.
 RJF-Sealed-Receptacles(213 Kb) |
| Close |
For very harsh vibration environment, how can we connect the RJF receptacle backtermination to our pcb without using a “fragile” RJ45 connection ?
we propose “22 00” with 8 tines holes which enable you to solder a wire directly from the RJF Receptacle PCB to your PCB.
|
| Close |
Which cable diam can be used with your plastic or metallic gland?
standard version : 5mm (.197 inch) to 12 mm (.472 inch)
with reducing grommet : 3 mm (.118 inch) - consult us.
|
| Close |
UTP
Unshielded Twisted Pair. cable made from pairs of wires which have been twisted together.
|
| Close |
STP
Shielded Twisted Pair
|
| Close |
SFTP
Double Shielded Twisted Pair - Braid and Foil (Note : for good EMI protection, we recommend to use this type of cable/cordset with RJ Field).
|
| Close |
LSZH, LS0H
Low Smoke Zero Halogen |
| Close |
HFFR
Halogen Free Flame Retardant
|
| Close |
Cat 5
A performation classification for twisted pair cables, connectors and systems. Specified to 100 MHz. Suitable for voice and data applications up to 155 Mbps (possibly 1000 Mbps).
|
| Close |
Cat 5e
Also called Enhanced Category 5. A performation classification for twisted pair cables, connectors and systems. Specified to 100 MHz. Suitable for voice and data applications up to possibly 1000 Mbps.
|
| Close |
|
|
